Swiċċ tal-buttuna SPST imdawwal
Dan huwa l-iswiċċ tal-buttuna tal-buttuna illuminata momentarja b'dijametru taċ-ċirku 9.6mm, il-buttuna tonda ta 'fuq għandha daqs ta' dijametru 5.6mm, id-daqs maqtugħ huwa 8mm. Il-każ u l-akkomodazzjoni hija magħmula minn -Nylon ta 'kwalità għolja 6/6 u terminal huwa magħmul minn liga tar-ram b'materjal miksi bid-deheb. It-tul totali ta' spinta...
Deskrizzjoni
This is the circle diameter 9.6mm momentary illuminated push button switch,the top round button has size of diameter 5.6mm,the cut out size is 8mm.The case and housing is made from high-quality Nylon 6/6 and terminal is made from copper alloy with gold plated material. The total length of a push button switch is 18mm. It has illuminated water clear actuator.
Dan is-swiċċ tal-buttuna ta' daqs żgħir b'operazzjoni ta' swiċċ momentanju u swiċċ mixgħul u mitfi b'1-arblu għall-kontroll ta' magna jew proċess.
The PB8 Series illuminated pushbutton switch is available with bi-color LED choices of red, green, yellow, blue and white. Panel mount and small in size the PB8 series is SPST and momentary, with silver or gold contact option. This illuminated push button switches features 100,000 electrical life cycles and PC pin terminal options. The illuminated panel mount button switch is made with polycarbonate actuators, nylon housing, and alloy materials for the contacts and terminals.
Parametru Bażiku
Speċifikazzjonijiet Elettriku | |
Klassifikazzjoni | 0.2A 36VDC |
Reżistenza għall-Kuntatt | 50MΩ Min(Initial) |
Reżistenza għall-iżolazzjoni | 100mΩ Min(at 250VDC) |
Qawwa Dielettrika | AC 500V (50-60HZ għal 1 m) |
Ħajja Mekkanika | Aktar minn 30,000 ċiklu |
Ħajja Elettrika | Aktar minn 10,000 ċikli |
Forza ta' Attwazzjoni | 200±100gf |
Ivvjaġġar | 1.8mm±0.3mm |
Funzjoni | OFF-(ON) |
Iwweldjar manwali | 350 grad għal 3 Sekondi |
Kulur LED | Aħmar, aħdar, abjad, isfar, blu |
Materjal | |
Bażi | PA66,UL rated:94 V-2 Min |
Kap | PC |
Terminal | Ram, miksi bid-deheb |
Daqs tal-Panew tal-Qtugħ | 8 (Dia.)mm |
Tip ta' Terminal | Pc Pin
|
Operazzjoni tal-Iswiċċ | Momentarju |
Tip ta 'Immuntar | PCB |
Dimensjoni

Attenzjonijiet dwar il-Proċedura tal-issaldjar
1. The illuminated push switch is strictly prohibited wave welding and reflow soldering,please choose the manual welding procedure,and control the welding temperature of 350 degree ±5 degree for 3±5 seconds
2. After the product is soldered on the PCB board,it's prohibited to use any solvent to clean the PCB board and please avoid the influence of the inner product.
Applikazzjonijiet tipiċi għal dan is-swiċċ tal-buttuna mdawwal minjatura jkunu:
• Test Equipment
• Telecommunications
• Networking
• Handheld Appliances
Dettalji tal-Ippakkjar
Stand Exported Packing for computer power switch:
inner bubble box--- inner box---carton (or by your request.)

Ġarr bil-baħar
Numru tal-kont FedEx/UPS/TNT/DHL għat-tbaħħir, jekk le, għandna bżonn niċċarġjaw il-merkanzija lill-kumpanija tiegħek.

Dwar FVWIN
The FVWIN was founded in 2013. The main activities — is the supply of electronics switches and sockets as well as connectors, a variety of illuminated switches, power socket ,USB connector ,XLR connectors and the provision of services for the production of PCB and contract manufacturing of electronic products.
Our products covers a wide range of audio and video equipment,instruments,medical equipment,home appliance,security equipment,etc

It-tags Popolari: swiċċ tal-buttuna mdawwla spst, iċ-Ċina, fornituri, manifatturi, fabbrika, personalizzati, bl-ingrossa, għall-bejgħ, magħmula fiċ-Ċina







